Saturday 20 August 2011

CR161 - CORE RC UAC-50 Universal Digital Charger

CR161

CR161 - CORE RC UAC-50 Universal Digital Charger

Universal Digital Charger, Discharger and Cycler, 12v & 110-240v.

The CORE RC Universal Digital Charger UAC-50 is a multifunction balance and rapid charger/discharger controlled by a high performance microprocessor and specialized operating software.
Multi voltage input of 110-240v AC or 12v DC with compatibility with all types of batteries including Lipo,(1s-6s) Li-lon, NiMH, NiCd,(1-15cells) Pb and LiFE. Fast charging up to 6 amps, discharging, balancing, cycling and much more....you won't need any other charger!!!
Specification;
-AC Input 110V-240V
-DC Input 11V-18V
-Max Charging Power: 50Watts
-Max Discharging Power: 5Watts
-Charge current range: 0.1-6A
-Discharge current range: 0.1-1A
-Nicd/NiMH Battery Cell Count: 1-15Cell
-LiPo/Li-Fe/Lilon Cell Count: 1-6Cell
-Pb Battery Voltage: 2-20V
-Temperature sensor available
-Balance: 2-6Cells
-Case: Plastic with gunmeatal chrome.
-Display: 16*2 character blue backlit display
-Dimension: 135mm X 112mm X 61mm
-Multiple leads included for all applications
-UK 3 Pin plug lead for 240v
Internal Independent Lithium Battery Balancer
The UAC-40 employs an individual cell voltage balancer. It is not necessary to connect an external balancer. (JST XH Balance board and lead included) see also CR114 and CR056 for alternative balance lead type.
Balancing Individual Cells During Discharge
During the process of discharging, the UAC-50 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single cell is abnormal.
Adaptable to Various Types of Lithium Batteries
The UAC-50 is adaptable to various types of Lithium batteries, such as Lipo, Lilon and the new LiFe series of batteries.
Fast and Storage Mode of Lithium Batteries
Purposes to charge Lithium batteries varies, 'fast' charge reduces the duration of charging whereas 'store' state can control the final voltage of the battery. So as to store for a period when the cell is not in use to protect the useful life of the battery.
Maximum Safety
Delta Peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery voltage exceeds the thresholds the process will be terminated automatically.
Automatic Charge Current Limit
You can set up the upper limit of the charging current when charging NiCad or NiMH battery.
Capacity Limit
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit it can be terminated by the sophisticated microprocessor in the UAC-50.
Processing Time Limit
You can also limit the total processing time to avoid possible defect.
Input Power Monitoring
To protect the 12vDC power source the voltage is monitored by the UDC-50. If the voltage drops below the limit, the process will be ended automatically.
Data Store/LoadA maximum 5 batteries data can be stored for user convenience. You can keep the date corresponding to program setting of the battery.
Cyclic Charging/Discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and balancing to stimulate the batteries performance.

No comments:

Post a Comment